cooler To AC:-The summer season is about to start and people are preparing to reuse their old coolers or ACs. Most people in India use coolers, know the whole trick? 
cooler To AC:-As the summer season approaches, many people are getting their old coolers and ACs ready for use. In India, coolers are more commonly used because they are affordable and effective. Many households continue to use the same old cooler every year, trying to repair it and get it working again. However, a common problem people face is that despite all efforts, the cooler doesn’t blow cool air. Some people consider buying a new cooler, but due to budget constraints, they end up relying on their old one. If your cooler is not giving cold air, don’t worry! Here are 5 simple tips to make your old cooler work like an AC:
1. Keep Your Cooler Away from Direct Sunlight
One of the most common mistakes people make is placing their cooler in direct sunlight. This makes the cooler less effective, and the air starts to feel warm. To prevent this, try to create shade above the cooler if your house gets a lot of sun. You can cover it with an umbrella, cloth, or any other material to block the direct heat from the sun, ensuring it keeps working efficiently.
2. Place the Cooler in an Open Area
For a cooler to work its best, it needs to have good airflow. If you place it in a closed room, the air inside becomes humid, and the cooler will not cool effectively. The ideal place for the cooler is near a window or a mesh door, where fresh air can come in. This way, the cooler can pull in fresh air and blow out cooler, fresher air.
3. Ensure Proper Ventilation
A key factor for your cooler to provide cold air is proper ventilation. If the room doesn’t have proper airflow, your cooler might increase humidity instead of cooling the air. Always make sure the room where the cooler is placed has exit points for air. Keep the door or window slightly open, so that air can flow in and out, making the cooler work more effectively.
4. Clean or Replace the Cooler Pads
Old cooler pads (the material inside the cooler that absorbs water) can become dirty and clogged with dust, which prevents the water from spreading properly. This results in the cooler not blowing cold air. To fix this, make sure to clean or replace the cooler pads at least twice each season. Also, check if there’s enough gap between the pads to allow airflow, ensuring it cools the air better.
5. Check the Water Pump and Pipes
A malfunctioning water pump or blocked pipes can prevent the water from reaching the cooler pads, which leads to the cooler not giving cold air. Ensure that the water pump is working properly and that the pipes are clean. If there are any blockages, clear them out so that water flows freely and evenly onto the cooler pads. This will help the cooler provide cooler air.
By following these simple tips, you can make sure that your old cooler continues to provide the cold air you need, just like a new one or even an AC, without breaking the bank.
